Views:
Gen 3 radios include the following vehicles: 2017 Impreza, 2018 Impreza, Outback, Legacy, Crosstrek, BRZ.
Gen 3.1 radios include ALL 2019 Models.

First, make sure the ignition switch is in the "ON" position and the clock is set to manual mode.
  1. Press the home button on the radio
  2. Select "Settings" and then select "Vehicle"
  3. Select "Clock Adjustment" and then select "Manual"
Once the clock is set to manual, follow the below steps to set the time.
  1. Using the i/SET switch located on the steering wheel pull the up and down arrows to display the menu screen entering screen
  2. Pull and hold the i/SET switch to go into the menu screen **Please note that for Impreza, Crosstrek, and Forester you will need to select the "Info" button on the steering wheel before using up and down arrows to get to the menu screen.**
  3. Select "Clock" within the setting screen and then "Adjust Time"
  4. Pull the up and down arrows to adjust the hour and then pull and hold the i/SET switch to set the hour and it will automatically change to the minute adjustment
  5. Repeat the above steps to set the minutes and then the adjustment will be complete
Keywords: General Inquiry
Comments (0)